NO LONGER AVAILABLE. REPLACED WITH NEXT-GENERATION KIT: 4D-ELIMINATOR-KIT-NG-HD
Description
Finally, an alternative way to power your flameless LED candles and other electronic devices that use 4 x D batteries! This 4 x D Battery Eliminator Kit is used to replace real D batteries in flameless LED candles and other electronic devices that use 4 x D batteries. For use in electronic devices that are heavily used or left on for extended periods of time. This 4 x D Battery Eliminator Kit includes 1 x D Active Dummy Cell Battery, 3 x D Passive Dummy Cell Batteries, and an AC to DC Wall Power Adapter. These components easily and neatly plug into each other for a complete "plug-and-play" battery eliminator solution! Stop changing out dead batteries and start saving money! Stop worrying about whether your electronic device is turned off or in the timer mode!
The D Active and Dummy Cell Batteries included in this kit are the same size as regular D batteries, so they easily fit into the electronic device's battery compartment spaces. It doesn't matter which space they go into as long as you observe the correct polarities just as you would when inserting real batteries. The thin flat flexible cable (FFC cable) coming out of the D Active Dummy Cell Battery can easily be run around the side of most battery compartment covers, so the original battery compartment cover can still be used. In some cases, it might be necessary to take a small file and file out a shallow groove in the battery compartment cover to give the FFC cable more room to run around the side of the cover.
The AC to DC Wall Power Adapter included in this kit is designed for use with the included 4 x D Dummy Cell Batteries. The AC to DC Wall Power Adapter plugs into a standard wall outlet and converts the 120VAC coming from the wall outlet into 6VDC which is the voltage required to power electronic devices that use 4 x D batteries. Since this AC to DC Wall Power Adapter can supply up to 1A of output current, it can power any electronic device on the market that uses 4 x D batteries.
The D Active Dummy Cell Battery FFC cable and AC to DC Wall Power Adapter cable can easily be hidden behind furniture, plants and under table cloths, rugs, decorative snow, etc.
Don't forget to check out our Battery Eliminator Accessories such as Power Extension Cables, Power Splitter Cables, additional Active and Passive Dummy Cell Batteries, and Slim-Line AC to DC Wall Power Adapters for use in tight spaces and power strips.
NOTE: The D Active Dummy Cell Battery and D Passive Dummy Cell Batteries are not real batteries and will not power an electronic device on its own. They need to be used in conjunction with the included AC to DC Wall Power Adapter as discussed above and depicted in the included diagram.
NOTE: Since each regular D battery supplies 1.5VDC, four D batteries will supply 6VDC. The included AC to DC Wall Adapter supplies an output voltage of 6VDC which is within the acceptable range required by electronic devices that use 4 x D batteries.
NOTE: The D Active Dummy Cell Battery is made of an AA Active Dummy Cell Battery and a hollow plastic D cell battery dummy case. The AA Active Dummy Cell Battery simply slides into the hollow plastic D cell battery dummy case as shown in the pictures. The hollow plastic D cell battery dummy case essentially serves as a AA to D battery size converter, so it will properly fit in the electronic device's battery compartment.
NOTE: The D Passive Dummy Cell Batteries are made of AA Passive Dummy Cell Batteries and hollow plastic D cell battery dummy cases. The AA Passive Dummy Cell Batteries simply slide into the hollow plastic D cell battery dummy cases as shown in the pictures. The hollow plastic D cell battery dummy cases essentially serve as a AA to C battery size converters, so they will properly fit in the electronic device's battery compartment.
WARNING(S): Do not attempt to charge the D Dummy Cell Batteries with a battery charger. Doing so may damage the battery charger.
IF YOU HAVE ANY QUESTIONS OR NEED TECHNICAL SUPPORT TO DETERMINE WHICH BATTERY ELIMINATOR KIT, REPLACEMENT PARTS OR ACCESSORIES YOU NEED, PLEASE DON'T HESITATE TO CALL OR E-MAIL US AT [email protected].
Features
· Can Be Used to Eliminate 4 x D Batteries in Flameless LED Candles and Other Electronic Devices That Use 4 x D Batteries
· Easy to Use "Plug-and-Play" Kit
· Perfect For Flameless LED Candles and Other Electronic Devices That Are Heavily Used and Left on For Extended Periods of Time
· Kit Includes 1 x D Active Dummy Cell Battery, 3 x D Passive Dummy Cell Batteries, 120VAC to 6VDC@1A Wall Power Adapter
· Thin Flat Flexible Cable (FFC Cable) Coming Out of Active Dummy Cell Battery Easily Runs Around Battery Compartment Cover and Under Electronic Device Without Causing it to Tilt or Not Sit Flat
· Power Cables Can Easily Be Hidden Behind Furniture & Plants, Under Rugs & Tablecloths, Around Plants & Other Objects, Under Decorative Snow, Etc.
· Works With Our Power Eliminator Kit Accessories Such as Power Extension Cables, Power Splitter Cables, Space Saving Slim-Line AC to DC Wall Power Adapters, Additional Active and Passive Dummy Cell Batteries
· FFC Cable Coming Out of Active Dummy Cell Battery Has 5.5mm x 2.1mm Barrel Socket at End That Mates with Barrel Plug at End of AC-DC Wall Power Adapter Cable
· Blue AA Active and Passive Dummy Cell Batteries Slide into Black AA to D Size Converter Dummy Cell Battery Cases
Specifications
Manufacturer
|
Made
in China for LightsandBatteries.com, LLC
|
Part
Number
|
4D-ELIMINATOR-KIT
|
UPC
Code
|
00850036828082
|
Eliminates
|
4
x D Batteries
|
D
Active Dummy Cell Battery
|
· Cable
Dimensions (Length x Width x Thickness): 10.83" x 0.20" x
0.00787" (275mm x 5.08mm x 0.2mm)
· Cable
Type: Thin Flat Flexible Cable (FFC Cable)
· Wire
Gauge: 22AWG Equivalent
· Connector
Type: 5.5mm x 2.1mm Barrel Socket
· Connector
Polarity: (+) Tip/Inner Conductor, (-) Ring/Outer Conductor
· Housing
Dimensions (Length x Diameter): 2.245” x 1.25” (57.023mm x 31.75mm)
· Housing
Material: ABS Plastic
· Terminal
Material: Nickel-Plated Brass
· Colors:
Black Cable, Black Connector, Black AA to D Converter Case, Blue AA Dummy
Cell Housing
· Blue
AA Active Dummy Cell Battery Slides into Black AA to D Size Converter Dummy
Cell Battery Case
|
D
Passive Dummy Cell Batteries
|
· Internal
Connections: (+) Terminals are Connected to (-) Terminals via Conducting Pins
· Housing
Dimensions (Length x Diameter): 2.245” x 1.25” (57.023mm x 31.75mm)
· Housing
Material: ABS Plastic
· Terminal
Material: Nickel-Plated Brass
· Colors:
Black AA to D Converter Cases, Blue AA Dummy Cell Housings
· Blue
AA Passive Dummy Cell Batteries Slide into Black AA to D Size Converter Dummy
Cell Battery Cases
|
AC
to DC Wall Power Adapter
|
· Input
Voltage: 110VAC-240VAC@50Hz-60Hz
· Output
Voltage: 6VDC@1A
· Cable
Length and Type: 5-ft (1.5m) Zip Wire
· Wire
Gauge: 22AWG
· Input
Plug Type: U.S (United States) Type A Plug, 2-Pins, Unpolarized, Ungrounded
· Output
Connector Type: 5.5mm x 2.1mm Barrel Plug
· Output
Connector Polarity: (+) Tip/Inner Conductor, (-) Ring/Outer Conductor
· Housing
Size (Width x Height x Depth): 1.54" x 2.45" x 1.06" (39mm x
62.2mm x 27mm)
· Housing
Material: ABS Plastic
· Color:
Black Cable, Black Connector, Black Housing
· Certifications:
FCC and UL Listed
|
Location
Rating
|
Indoor
Use Only
|
Accessories
|
· Active
and Passive Dummy Cell Batteries
· AC
to DC Wall Power Adapters
· Power
Extension Cables
· Power
Splitter Cables
|