Description

This 9V Active Dummy Cell Battery is used to replace a real 9V battery in electronic devices that use a single 9V battery. It has an 11" long thin flat flexible cable (FFC cable) with a 5.5mm x 2.1mm barrel socket at the end and works with the barrel plugs on all of our Battery Eliminator Kits and Accessories (Power Splitter Cables, Power Extension Cables, AC to DC Wall Power Adapters, etc.). Works in conjunction with the appropriate AC to DC Wall Power Adapter to eliminate expensive batteries that are constantly having to be replaced. Please read the detailed discussion and diagram for the components that make up a complete Battery Eliminator solution. Stop changing out dead batteries and start saving money with our battery eliminator kits & accessories.

This 9V Active Dummy Cell Battery is one component of an overall Battery Eliminator solution which consists of a 9V Active Dummy Cell Battery (this component) and an appropriate AC to 9VDC Wall Power Adapter, The tip/inner conductor of the barrel socket goes to the (+) terminal of the 9V Active Dummy Cell Battery, and the ring/outer conductor of the barrel socket goes to the (-) terminal of the 9V Active Dummy Cell Battery. This internal connection is needed to complete the circuit necessary in the electronic device when used in conjunction with the appropriate 9V AC to Dc Wall Power Adapter.

This 9V Active Dummy Cell Battery is the same size as a real 9V battery, so it will fit in the existing space in the electronic device’s battery compartment, and the terminals on the 9V Active Dummy Call Battery will also work with standard 9V battery snaps. The FFC cable can easily be run around the side of most battery compartment covers, so the original battery cover can still be used. In some cases, it might be necessary to take a small file and file out a shallow groove which gives the flat cable a little bit more room to run around the side of the battery cover.

NOTE(S): This is not a real battery and will not power an electronic device on its own. It needs to be used in conjunction with the other necessary components that make up a complete Battery Eliminator solution as discussed above and depicted in the included diagram.

IF YOU HAVE ANY QUESTIONS OR NEED TECHNICAL SUPPORT TO DETERMINE WHICH COMPONENTS YOU NEED, PLEASE DON"T HESITATE TO CALL OR E-MAIL US AT [email protected]

Features

· Same Size as a Real 9V Battery

· 11” Long Thin Flat Flexible Cable (FFC Cable) with 5.5mm x 2.1mm Barrel Socket at End

· FFC Cable Will Fit Around Most Battery Compartment Covers and Under Electronic Device Allowing it to Sit Flat Without Tilting

· Works With Barrel Plugs on all of Our Battery Eliminators Kits and Accessories (Power Splitter Cables, Power Extension Cables, AC to DC Wall Power Adapters, Etc.)

· (+) Terminal is Internally Connected to Tip/Inner Conductor of Barrel Socket, and (-) Terminal is Internally Connected to Ring/Outer Conductor of Barrel Socket in Order to Complete Circuit Necessary to Supply Power to an Electronic Device

· Works in Conjunction with an Appropriate AC to 9VDC Wall Power Adapter to Supply Power to an Electronic Device in Lieu of Expensive Batteries

· Battery Terminals Work with Standard 9V Battery Snaps.

· One Component That Forms a Complete Battery Eliminator System

· Part of a Battery Eliminator System That's Perfect for Use in Electronics Devices That Stay in One Place Such as Smoke & Fire Alarms, Carbon Monoxide Detectors, Bedside Radios, Multi-Meters, Etc.

Specifications