Operation

When the button on the bottom of each votive is pushed in to the “on” position, the 10-function hand-held remote control feature is active. The included 10-function hand-held remote control features the following functions: votive power on/off; votive timer modes: 2-hour, 4-hour, 6-hour, 8-hour; votive flicker on/off, votive brightness (+)/(-).

When the votive is in one of the timer modes, it will automatically turn “on” for the corresponding time and then turn “off” for the remaining time, e.g., if the votive is in the 6-hour timer mode, the votive will remain “on” for 6-hours from the time that the button is pushed on the hand-held remote control, and then it will remain "off" for 18-hours. The votive will repeat the same daily cycle until the votive is turned "off" with the 2-position switch, or until the votive is put in another timer mode by pressing one of the timer mode buttons.

When the "Candle" MODE button is pressed on the 10-function hand-held remote control, the LEDs in the votives will flicker and randomly vary in brightness to simulate an traditional flame candle. When the "Light" mode button is pressed, the LEDs in the votives will slightly flicker and vary in brightness only a slight amount. The brightness of the LEDs in the votives can be decreased by pressing the "-" DIM button on the remote 1 or more times. The moving flame action will also decrease in intensity when the "-" DIM button is pushed 1 or more times. Most people prefer the "Light" MODE of operation with the LEDs at maximum brightness. It is normal for the LEDs to slightly flicker when the votive is set to its maximum brightness value since this is part of the realistic moving flame effect.

A red LED in the charging base indicates that power is being supplied to the charging base by the supplied AC adapter. There are also red LEDs in the bottom of each votive indicating that the votive is charging. The red LEDs in each votive will turn off once that votive is fully charged.

Notes

• If the votive begins to flicker, then the votive is almost completely discharged and needs to be placed in the charging base.
• If the votive is extremely discharged, then it might take several minutes for it to begin working again after being placed in the charging base.
• If the red LED on the bottom of the votive begins to flicker, then the votive is almost completely charged.
• It is normal for the votive to flicker a little bit when the votive brightness is set to its maximum value. This is part of the realistic moving flame effect.
• When one of the timer mode buttons (2-hour, 4-hour, 6-hour, 8-hour) is pushed on the 10-function hand-held remote control, the votives will blink once indicating that they are now in one of the timer modes.

Features

• Set of 6 Rechargeable Votives
• Unique Translucent LED Glow Adds Additional Beauty
• Realistic Moving Flame Technology

• Long-Lasting Warm White LED Lights

• Charging Base Includes AC Adapter

  • Red LED in Base Indicates Power is Being Supplied to Base

  • Red LED on Bottom of Votive Indicates Votive is Charging

• Votive Dimensions:1.6” x 2.5” (Diameter x Height)

• Charging Base Dimensions: 6.3” x 4” x 0.71” (Length x Width x Height)

• Tough Ivory Colored ABS Plastic Construction

  • Won’t Melt in the Summer Sun or Crack in the Winter Cold

• Built-In High-Capacity Lithium-Ion Rechargeable Battery

  • Long Lasting:Over 1,000 Charge/Discharge Cycles

  • ~3 Hours to Fully Charge

  • ~23 to 30 Hours of Burn Time per Charge

• Votives are Unscented - Perfect For Those Suffering From Allergies

• Flames Tolerates Windy Conditions

• Timer Function:2-Hour, 4-Hour, 6-Hour, 8-Hour

• Built-In 2-Position “On/Off” Switch in Each Votive

• Built-In Receivers For Use With 10-Function Hand-Held Remote Control (Included)

  • Votive Power On/Off

  • Votive Timer Function: 2-Hour, 4-Hour, 6-Hour, 8-Hour

  • Votive Flicker On/Off

  • Votive Brightness (+)/(-)

Applications